Product Description

Antminer D3 X11 ASIC Miner for Dash Mining

Specifications:

1. Hash rate: 15 GH/s (Variation of ±5% is expected)

2. Hashing algorithm: X11

3. Power consumption: 1200W (at the wall, with Bitmain's APW3 PSU, 93% efficiency, 25°C ambient temp).

4. Power Efficiency: 1.6 J/MH + 10% (at the wall, with APW3 93% efficiency, 25°C ambient temp)

5. Rated Voltage: 11.60 ~13.00V

6. Dimensions of the miner: 320*130*190mm

7. Operating Temperature: 0 °C to 40 °C

8. Network Connection: Ethernet

Notes:

Power consumption figures will vary with your PSU's efficiency, the ambient operating temperature and the accuracy of the power meter.

PSU: A power supply unit is not included. You will need an ATX PSU with at least 9 six-pin PCIE connectors. There are 2 PCI-e connectors for +12V DC input on each hashing board and all 2 are required. Do not connect more than one PSU to the same hashing board!

We recommend the APW3 ++ power supply for use with the Antminer D3 15GH/s. One power supply supports one Antminer D3 15GH/s.

Separate power supply to control board: there is one additional 6pin PCI-e connector on the IO board which must be connected to the PSU to get power. Be sure to power on the miner only after all the 9 PCIE connectors are connected to power supply